 |
 |
 |
 |
 |
Print this page is sponsored by | |
|
|
|
||
 |
|
|
|
 |
www.MyMacStore.com For all your iPod, iPhone and Mac Gear |
|
|
|
|
|
|
Tim Hickman Launches Hard Candy Bubble Shell Case For 13” MacBook
•Hardware •Comments •Tell-a-Friend
Tim Hickman, former GM of Speck Products, has gone independent with a new line of "Hard Candy" hard shell cases for 13" MacBooks and certain PC netbook models.
Smaller portables are more likely to be tossed into a purse or backpack than into a padded brief case. They need protection that is always on and stylish. Like iPods and cell phones before them, the Netbook and subnotebook generation is looking to protect and personalize their investment.
Hard Candy Cases is a brand new company, CEO Tom Hickman started and ran Speck Products from the beginning (2001) until 2006. The comoany has been working with the same factory for the last 5 years and can produce 40,000 units a month per item, and has also been working with the same logistic partner for the last 3 years and can handle your most complex shipping, drop shipping, packaging, UCC 128, and EDI requirements.
Hard Candy Cases - where fashion meets protection.
Today's mobile computers are with you all the time and need to be protected and personalized. Always-on hard shells mean the computer is always protected and Hard Candy's form specific design means a significantly higher attach rate. Aworld class design center, industry leading engineers, and in house laser model scanners help facilitate bringing to market the best form fitting cases.
Stand out from the crowd and add some personalization and protection to your MacBook with Hard Candy's Bubble Shell case. Available in a variety of colors, these snap-on, always-on cases provide protection from scrapes and scratches while adding personality to your MacBook. These cases are model specific.
Hard Candy Case New MacBook 13"
• Designed specifically for MacBook 13.1"
• Polycarbonate Shell protects from Bumps & Scratches
• Easy to use Snap-On Always-on design
• Bubble texture creates a unique design statement.
Features
• Polycarbonate Shell protects from Bumps & Scratches
• Easy to use Snap-On Always-on design
• Bubble texture creates a unique design statement.
How to Install Your Hard Candy Case on your MacBook:
Installing your Hard Candy Bubble Shell case on your new MacBook 13" laptop should be super simple and easy. First, recommended are dusting, or cleaning your MacBook, reducing the chances of dust scratches. Place the bottom of your Bubble Shell on a table or other hard surface. While making sure that your MacBook is completely closed, press your computer gently into the case bottom until it snaps into place. Make sure to apply pressure to the corners ensuring proper fit into all the tabs of the case.
Once your Bubble Shell case bottom has been installed, you can install the top in the same fashion. Again, be sure to apply pressure to the corners of your Bubble Shell case in order to seat it properly until it snaps into place.
If you are experiencing difficulties fitting, we recommend using a credit card to separate the case from the computer. Simply slide the card between the case and your MacBook near the tabs, and once the case is off, try fitting again.
To ensure ease of use, we recommend removing the cases periodically to dust your computer and clean your Bubble Shell hard case.
The Hard Candy Cases design team builds each case specifically around the requirements of each computer. Because each computer is different, we take into consideration placement of each plug, port, switch, and panel. By using our cases, you will retail usability of every port, plug, vent, and panel as before.
Hard Candy Cases are injection molded with a unique blend of polycarbonate plastics chosen based on their ability to provide your computer with long lasting, easy to clean protection from surface scratches and scuffs.
This hard shell will fit like a glove on your MacBook 13" Laptop built after October 2009. If you are unsure about your computer, check out Apple's Website
to see if your computer matches.
Hard Candy Cases does everything it can to prevent their cases from inhibiting the original functionality of your model, and specifically design their cases understanding that heat dissipation is an issue which must be addressed. Our cases feature vents which mimic the location of the original vents on your model, providing proper airflow to reduce chances of thermal shutdown.
Hard Candy Case for New MacBook 13"
- Designed specifically for MacBook 13.1"
- Polycarbonate Shell protects from Bumps & Scratches
- Easy to use Snap-On Always-on design
- Bubble texture creates a unique design statement.
- Depth: 9.32 inches
- Width: 13.2 inches
- Height: 1.28 inches
- Weight: --- oz.
- Colors: Clear, White, Black, Pink, Blue, Red
Ships in recycled materials container.
Shipping Dec 4th, 2009.
SRP $49.95
For more information, visit:
http://www.hardcandycases.com/
•Hardware •Comments •Tell-a-Friend
Article URL:
http://www.applelinks.com/index.php/more/25689
Next Article: Extend the Wi-Fi range of your Mac With BearExtender n3
Previous Article: Micron RealSSD C300 Solid-State Drive: the Fastest Drive for Notebook and Desktop Personal Computers
|
|
|
|
|
Print this page is sponsored by www.MyMacStore.com For all your iPod, iPhone and Mac Gear |
|
|
|
|
|
|